Archive for the ‘RKDefense General Topics’ Category

Why You Should Carry Either Stun Guns Or Pepper Spray

Friday, October 16th, 2009

Although many people think that stun guns are dangerous, they are very helpful when you find yourself in a situation that requires some self-defense. How these guns work is they pass an extremely high voltage pulse through the individual’s nervous and muscle system. All the energy gets dumped into the muscles and this is not done normally, but rather at quite a high pulse frequency.

What this does is it causes the muscles to function very rapidly but also not very efficiently, giving you time to get help or get away. Your attacker will find it difficult to move and will have to be still for some time in order to recover.

Pepper spray on the other hand, although also very effective, is a little more difficult to use in a situation where you have to be quick. However, if you are able to reach for the spray and direct it into your attacker’s face with no problem, then that is fine.

Pepper spray when sprayed in the face will make your attacker stop moving and probably sit down. Their eyes will be burning so much they will feel like they are going to pop out and if they breathed in some of the spray, which they should have if you sprayed enough, they will find it difficult to breathe for some time. Once again, this will leave you with enough time to escape and call for help.

When shopping for stun guns you should be aware that there are many makes and models for you to choose from, each with differing voltages. If you are looking for a good little pocket or purse sized weapon look no further than the Streetwise Small Fry Stun Gun which carries 400,000 to 1,000,000 volts! Other stun guns like the Muscle Man are just as effective at 100,000- 600,000 or the Panther Stun Gun at 100,000 to 600,000 volts.

If you are interested in something, a little different you could go with the Blast Knuckles Stun Gun, hold this puppy in your fist and shock an attacker with 950,000 volts. For some serious self-defense there are stun guns with 1.2 million volts or more. Stun guns come in a variety of shapes and sizes so choose the one you are most comfortable with.

You also have many options when you are looking at pepper spray. There are units which can be carried in your pocket or on a key ring, models that look like ordinary items such as a pen or lipstick case. There are also pepper spray units designed for jogging or cycling and for home defense. You can choose the spray that best suits your needs. As you can see there is one for almost every occasion.

Carrying some form of protection wherever you go is important, you should strive to have a self-defense device with you always. Stun guns or pepper spray, it really does not matter which you prefer in fact you can carry both if you like. Just do not be caught off guard, let bad people know quickly that they messed with the wrong person! Self-protection is a right not an option so make sure you are always safe whether you are at work, in public or even at home, you can never be too careful.

Ryan Karpilo
Owner
RKDefense.com

Share this Post[?]
        

Security Products For College Students

Wednesday, October 7th, 2009

Security Products For College Students

College campus are being targeting more and more by criminals due to easy access, abundant opportunities, and the relaxed atmosphere. If you attend college or you’re the parent or guardian of a college student these products will enhance you or their safety on campus.

Pepper Spray

Pepper spray is an affordable, light weight, compact and easy to carry non-lethal device for any student. It allows you to keep your distance for the assailant with its ability to spray up to 15 feet away. It is highly effective causing extreme issues for your assailant for at least 30 minutes; giving you the time to flee and get help. It is 99 percent effective putting the odds on your side. I would recommend a key chain pepper spray with a stream spray because there is less chance of blow back and has a high concentration upon impact. When using the pepper spray; spray it in a fan motion to assure target acquisition.

Stun Guns

Stun Guns are powerful personal security devices that will drop an attacker to the ground giving you time to flee and get help. Stun guns come in a large variety of sizes, shapes and prices; purchase the highest voltage you can afford. Why? The higher the voltage, the faster it moves through the body and the quicker and more debilitating the effect. The down side to stun guns is the close proximity you have to be in to use it on the attacker. Always hit soft tissue areas like the groin, kidney area, face, neck, arm pit, and thigh to gain the optimal effects; however it will be effective anywhere. I would recommend the Stun master multifunction stun gun because it has some features that no other stun guns have. For example it comes with a wrist strap pin; when the pin is pulled it won’t fire so if the unfortunate happens and the attacker takes it away from you they can’t use it against you. It also has a 110 decibel personal alarm to get people’s attention in the area.

Tasers

The Taser C2 offers protection while keeping your distance from you assailant up to 15 feet away, one pull of the trigger produces a full 30 seconds of debilitation and it doesn’t matter where you hit the body the affect is the same. The probes can penetrate up to a combined two inches of clothing and works effectively even if the attacker is on Drugs or Alcohol. It works because they affect the neuromuscular system mixing the signals up and taking their ability to use their muscles away. They come equipped with laser sights allowing you to easily target your assailant. Tasers are more expensive than pepper spray or stun guns; however with any TASER if used for self defense and you leave it behind to flee, file a police report and send a copy to TASER International and they will replace your TASER for free.

Conclusion:

You or your college student can benefit greatly when the time comes that you need to protect yourself by having and practicing with a personal security and self defense device. There are other products available that can offer protection in different applications and circumstances, I only went over three. It is important if you choose to carry a personal security or self defense product that you are familiar with it and practice with it so you can use it effectively. Remember the best time to learn your lesson about personal security and self defense is before something happens.

Adam Sisterhen is the president of Your Personal Security Store and author of personal security and self defense articles. He is a proud advocate and a firm believer in personal security and self defense products that help protect you, your family and your loved ones.

To find the products talked about in this article and a wealth of information check these links below.

Personal Protection Products including Stun Guns, Pepper Spray, MACE Spray, TASER Devices and Home Security Products: RKDefense.com

Ryan Karpilo
Owner
RKDefense.com

Share this Post[?]
        

TASER C2 TASER Video

Wednesday, October 7th, 2009

TASER C2 Video

Share this Post[?]
        

Video Surveillance FAQ: Q&A Part II

Tuesday, October 6th, 2009

Here is part two to our Video Surveillance FAQ. Here are the most common questions asked and our response.  If you have any questions please contact us directly:http://rkdefense.com/contact.php  and we will be happy to answer them, of course you can always post a comment below.

Questions -
How do hidden cameras work? A small board camera is built into an everyday item. The camera can
be wired which means it is connected to the DVR or VCR using a cable. The camera can also be
wireless, in this case the camera transmits a signal to a receiver that is connected to the
DVR or VCR.

Can I get audio in my hidden camera?
– No you cannot. According to United States federal laws,
audio should not be used in a surreptitious manner. One example of surreptitious interception is
audio in a hidden camera. This includes pinhole board cameras and all covert or hidden cameras;
i.e., a clock radio. Audio in a hidden camera or board camera is only available to law enforcement
agencies. Title 18, Section 2512.

What is the difference between a wired and a wireless camera?
– Wired cameras have a video cable
that runs from the camera to your recording or viewing device such as a DVR, VCR or monitor.
Wireless cameras have a built-in transmitter that sends the video signal to a receiver. The
receiver connects to your recording or viewing device.

How far can a wireless hidden camera transmit? – Standard wireless hidden cameras can transmit up
to 1000 feet and high-powered wireless hidden cameras can transmit up to 2500 feet.

How many wireless cameras can you have in one location? - You can have up to four wireless
cameras in one location. You can view all cameras at once using four receivers or you can use one
receiver and switch to each camera. You will only be able to view one camera at a time if you only
use one receiver. If you want to install multiple wireless cameras in one location it’s best to
order them at the same time so that we can put them on different channels.

Will a cordless phone interfere with wireless cameras? – Cordless phones that operate on the 2.4
GHz frequency will cause interference with 2.4 GHz cameras. Interference should be minimal and
usually occurs if the phone is between the camera and receiver. Wireless Internet, networks and
Wifi can cause interference too.

What is a Quad? – A Quad is used with a VCR or other single channel recording device that splits
your monitor into 4 sections allowing you to view 4 cameras at once.

What is a 2.4 GHz wireless frequency?
– A frequency is used to transmit a signal or data like
video. 2.4GHz is the specific wireless frequency that our tranmitters use to send video signal
to a receiver. All of our wireless cameras operate on the 2.4 GHz frequency. Range varies from
200′ to 700′ depending on environmental conditions. These units are FCC approved.

Are the transmitters FCC approved? – The transmitters used in all of our wireless systems are
FCC and Industry Canada Certified.

What is CCD? – CCD is used in professional cameras because of it’s high resolution quality and
it’s ability to record in low-light situations. CCD is basically a small silicon chip that
receives light and turns it into voltage variations which makes up an image. It’s usually
measured in inches with 1/3″ CCD being the standard. They are higher priced but are great for
cameras that may require vision in near darkness.

Will a Quad allow four cameras to record at the same time? – Yes you can record all four cameras
at the same time. You also can record using a switching monitor, which will record the camera
that is showing at that moment.

Do the receivers work through walls up to two feet thick? – Yes as long as there isn’t excessive
amount of metal in the wall.

Do the plug and play connections require extra wire to run the signal back to the VCR or TV?
-
Yes, you need to buy the length of cable you need we offer the CA-25, CA-50, CA-100 and the CA-150.
What is the difference between a PC based DVR and a Embedded(stand alone) DVR? – A PC based DVR has
all the functions of a computer. An embedded DVR functions only as a DVR.

How many hours will a DVR record? – The amount of time a DVR will record for is based on the
size of the DVRs hard drive, the number of cameras recording and the number of frames per second
it is recording at. Our stand alone DVRs uses 3.4GB per camera per day. 4 camera stand alone on
250GB hard drive will record for 18 days. 8 camera stand alone on 250GB hard drive will record for
9 days. 16 camera stand alone on 500GB hard drive will record for 9 days.

What is a Plug and Play connection camera?
– It is an RCA Video plug and a power plug on the
camera for easy connection to VCR or TV. This is done by running the RCA (Aux) line into the
VIDEO IN of the VCR or TV. The TV or VCR must be set on the correct channel to view the VIDEO
IN picture.

How many cameras can I hook up to one TV?
– You can hook up as many cameras as your TV has
inputs. Most TVs have 2 inputs but when using a quad you can hook up four cameras.

How long will the camera last with a 9-volt battery?
– The Cyber Eye and BD-127 will last 5 hours.

Between what temperatures is it safe for cameras to operate in?
It is safe for B/W cameras to operate between -23°C to + 50°C or -10ºF to +122ºF
It is safe for color cameras to oeperate between -23º C to +40ºC or -10ºF to +104ºF
It is safe to store cameras between -30ºC to +70ºC or -22ºF to +158ºF

What is the operating voltage of a camera?
– Our cameras range from 9 volts (CMOS) to 12volts,
and also 24 volt professional models.

What is a varifocal lens? – A varifocal lens is one where the focal length of the lens can be
varied. This is a fancy way of saying it is a zoom lens. Most varifocal lenses have, and in almost
all circumstances should have, an auto iris feature.

What is a fixed lens?
– A fixed focal length lens cannot zoom. The focus is fixed. A fixed focal
length lens usually allows more light to pass through the lens at a given focal length than a
varifocal, or zoom lens. This can be important in low light situations.

Thanks again to all our customers for the questions and we hope we answered them right! lol.  If you have any questions at all please contact me directly at ryan at rkdefense dot com or go directly to our contact page: http://rkdefense.com/contact.php

Thanks,

Ryan Karpilo
Owner
RKDefense.com

Share this Post[?]
        

Video Surveillance FAQ: Surveillance Definitions

Tuesday, October 6th, 2009

We have been getting  a lot of good questions over the past year, so we have put them all together into two parts.  Here are the most common questions regarding all of those funny terms used in the Video Surveillance Industry.

Frequently Asked Questions
Surveillance Definitions -
AGC – Automatic Gain Control is an electronic system found in many types of devices. Its purpose
is to control the gain of a system in order to maintain adequate performance over a range of input
signal levels. Or An electronic circuit that tries to keep the video signal at a constant level
(1volt peak-peak). Useful on cameras working at low light levels

AI – Auto Iris is an electronic circuit that acts as an iris on CCD cameras by electronically
shuttering the CCD sensor. Or An automatic method of varying the size of a lens opening in
response to changes in scene illumination.

AWB – Auto White Balance is an electronic process used in video cameras to retain true colors.
It is performed electronically on the basis of a white object in the picture.

CCD – Charged Coupled Device: It is analog technology. The CCD camera has a little bit higher
resolution than CMOS. The camera also functions better in low light. A CCD camera drains a little
bit more power than the CMOS cameras. It uses 12v instead of 9v. CMOS camera is smaller than a
CCD camera and works longer with the 9v battery.

CMOS – Complementary Metal Oxide Semiconductor: a lower resolution camera compared to a CCD model.
The advantage of a CMOS camera is that it uses lower operation current.

HAD CCD – Hole Accumulation Diode is a type of CCD sensor with a layer designed to accumulate
holes (in the electronic sense), thus reducing noise level.

S to N Ratio – Signal to Noise Ratio is simply the ratio of the signal power and noise power,
expressed in decibels (dB). Or measure of noise on a video signal. It is represented in Decibels
as the level of the video signal compared to the level of noise present on that signal. The
higher the signal to noise ratio the better.

BLC – Balance Light Control is a method to compensate for bright spots in a picture. It is also
important to consider whether there are bright spots in the picture such as car headlights which
can make identification of the vehicle registration or model impossible. This can also be a major
problem where it is necessary to identify a person who is moving from bright daylight into
artificial light. This could result in the subject becoming an unidentifiable silhouette.

OSD – On Screen Display is a method of displaying set-up information or instructions on to a
display monitor.

Resolution – Resolution measures the cameras ability to reproduce an image. The higher the
resolution, the better the picture quality.

LUX – LUX is the measurement of low light needed for the camera to view and record properly.

FPS – Frames Per Second is the number of still frames (pictures) that give the illusion of motion,
which appear in a single second of time.30fps is considered “Real Time”. So for Real Time viewing
of your cameras, you need at least 30fps for each camera.

IR – Infrared, IR LEDS are used on Day/Night cameras which allow the camera to see in the dark.

Focal Length – the distance from the surface of a lens and its focal point.

That should sum it up.  If you have any others that you would like to add and or talk about please post a comment and I will follow up with an answer.

Ryan Karpilo
Owner
RKDefense.com

SOURCE: http://www.rkdefense.com

Share this Post[?]